Skip to content

Since 2006 · Dubai, Doha and Damascus

Hospital solutions

MRC Modular Cleanrooms

GRP and HPL panel cleanrooms, cleanroom accessories and portable BOXlab units from MRC Cleanrooms, supplied by Ultravision for hospital, laboratory and pharmacy projects in the UAE.

What a cleanroom project can include

  • GRP wall and ceiling panels or HPL walls
  • Doors, windows and built-in furniture
  • Pass-through hatches and air showers
  • Hygienic and anti-static flooring
  • HVAC with HEPA-filtered air handling
  • IQ, OQ and PQ validation
  • BOXlab portable cleanroom units

Ultravision supplies MRC modular cleanrooms to hospitals, laboratories and pharmacies in the UAE. The rooms are built from moulded GRP or high-pressure laminate (HPL) panels with GRP doors, hatches and furniture, and MRC also makes the containerised BOXlab. Ultravision supports each project from planning and solution selection through installation coordination, validation and after-sales service.

What the panel system offers

Fewer joints to clean

MRC states that its one-piece moulded GRP panels, with integral coving, have 70% fewer joints.

Resistant to chemicals

MRC describes its GRP panels as resistant to chemicals, impact and hydrogen peroxide (H₂O₂).

Made to the room

Panel widths and heights are made to measure, with windows, doors, furniture and service drops built into the walls.

Fixed or portable

A panel cleanroom is built into the building, while a containerised BOXlab unit covers temporary or remote needs.

Validated before use

Installation, operational and performance qualification (IQ, OQ, PQ) confirms the room performs to the project requirements.

Long design life

MRC states a 40-year design life for its cleanroom panel systems.

Panels, accessories and services

  • GRP wall and ceiling system

    One-piece moulded GRP panels with integral coving, in custom widths and heights, with windows and furniture built in.
  • HPL wall system

    Double-sided high-pressure laminate bonded to an aluminium subframe, with a matt, non-porous surface and flame-spread resistance.
  • Cleanroom accessories

    Pass-through hatches, air showers, garment cupboards, filter boxes, dispensing and weighing booths, emergency exits, step-over benches and speech units, made in GRP for easy cleaning.
  • Cleanroom flooring

    Vinyl, epoxy, raised, perforated air-return, anti-static and conductive floors, all hygienic and easy to sanitise.
  • HVAC and validation

    HVAC design, equipment selection and balancing, HEPA-filtered air handling and pressure-cascade commissioning, then IQ, OQ and PQ validation and maintenance contracts.
  • BOXlab portable cleanroom

    A containerised cleanroom that arrives pre-assembled with HEPA filtration, lighting, workstations and cleanroom panels. MRC says it can be configured to ISO 5.

Where MRC cleanrooms are used

  • Pharmacy IV preparation and compounding rooms
  • Hospital and critical care laboratories
  • Isolation suites
  • Operating theatres
  • Pharmaceutical and microelectronics facilities
  • Temporary or remote facilities (BOXlab)

Manufacturer

MRC Cleanrooms

MRC Cleanrooms makes the GRP and HPL panel systems, accessories and BOXlab units described on this page. Ultravision supplies them to healthcare projects in the UAE.

Manufacturer website (opens in a new tab)

From planning to validation

  1. Requirements

    Space, workflow, air control, access points, maintenance access and the activity the room will support are reviewed early.

  2. Solution selection

    Ultravision helps choose the panel system, accessories, flooring and HVAC scope, or a BOXlab unit, for the application.

  3. Coordination

    Engineering, operations and procurement teams coordinate early, which helps reduce project delays.

  4. Installation

    Installation is coordinated on site, with technical guidance from the Ultravision team throughout.

  5. Validation and support

    IQ, OQ and PQ confirm the room performs as required, followed by after-sales support and maintenance.

Cleanrooms: questions

Ask our team a question
What are MRC cleanrooms?

MRC cleanrooms are modular controlled environments built from GRP or HPL panel systems, with GRP doors, hatches and furniture. Ultravision supplies them in the UAE for hospital laboratories, pharmacy preparation rooms, pharmaceutical facilities and other spaces where air quality and hygiene must be controlled.

What is the difference between ISO and GMP cleanrooms?

ISO cleanroom classes mainly define particle control and environmental classification. GMP cleanrooms add requirements for hygiene, process control, documentation, validation and operating procedures. Which standard applies to a cleanroom depends on what it is used for and the regulations that cover that activity.

What is the difference between ISO 7 and ISO 8 cleanrooms?

An ISO 7 cleanroom is cleaner and more tightly controlled than an ISO 8 cleanroom. ISO 7 is common in areas that need higher particle control, while ISO 8 often suits support areas, gowning rooms and less critical cleanroom spaces.

What is the MRC BOXlab used for?

BOXlab is MRC’s containerised modular cleanroom. It arrives pre-assembled and is used for temporary hospital projects, remote facilities, IV preparation areas, laboratory work and rapid expansion of cleanroom capacity.

What cleanroom validation does Ultravision support?

Ultravision supports cleanroom validation through Installation Qualification (IQ), Operational Qualification (OQ) and Performance Qualification (PQ). Together these steps verify that an MRC cleanroom is installed correctly, operates as intended and performs according to the project requirements.

Planning a pharmacy or laboratory cleanroom?

Tell us about the facility, the departments involved and your timeline. We will reply with options, a scope and a quotation.

WhatsApp us (opens in a new tab)